Operating Instructions; Introduction To The Control Panel And Display Interface; Start The Machine - Auxilab Fugelab-GB10 Manual De Usuario

4

Operating instructions

th

4.1 Introduction to the control panel and display interface

SPEED
Introduction to Figure 1, function of the control display panel:
▲：Move up button
▼：Move down button
ENTER：Confirm button
DOOR/STOP：Open / stop button
START：Start button
RCF: Relative centrifugal force
TIME: Centrifugation time setting button
SHORT: Centrifugal button moments
SPEED: Speed setting button
SPEED/RCF: Speed / centrifugal force display
TIME: Time display

4.2 Start the machine

Connect one side of the power cord, which is attached, to the power outlet in the
posterior of the centrifuge left side, and connect the other side to the main supply, in a
separate outlet. Power range of this device is AC230V 50Hz/60Hz. Switch on the button
Versión 08 Enero 2018
SPEED RCF
4000
SHORT
Figure1: schematic drawing of control panel
TIME
10
TIME
RCF
START
ENTER
DOOR
STOP
Pág. - 35 -