Warranty - Auxilab Fugelab-GB10 Manual De Usuario

5.1.3.4 Please wash the rotor with a sponge or cotton bedewed with a neutral detergent,
wash off the neutral detergent with distilled water. Don't sprinkle or spray water on the
rotor because remaining liquid will cause corrosion. Bottom up drying is allowed after
cleaning.
5.1.3.5 Remove fragments from centrifugal cavity with rags or tweezers.
5.1.3.6 Please paint grease on the spindle motor and connection part between rotor and
axle hole.
5.1.3.7 Please cut off the power and unplug the power cord connected to the backside of
the machine before removing the front shell. Power operation is not allowed. Prevent
electric shock to any people or damage to the machine.
Note: This operation can only be done by specially trained staff from Nahita.
5.1.3.8 Only accessories provided by Nahita can be used in this machine.
5.1.3.9 Please cut off the power when you don´t need to use the centrifuge.
5.1.3.10 The machine is a precision instrument. Please keep it away from moisture,
shock, etc.
Fragile

5.2 Warranty

-
Regular checks of the equipment are not included in the warranty.
-
Any manipulation by non-authorized people will void the warranty.
-
Fuses and accessories, including losing them, are excluded from the warranty. Wear
of pieces by normal use is also excluded.
-
Make sure to keep the purchase invoice in case you need to make any claim or
warranty request. Attach the invoice or a copy as a warranty document if you send
the equipment to Nahita Technical Service.
Versión 08 Enero 2018
Upward Moisture-proof
Pág. - 42 -