Packing List - Auxilab Fugelab-GB10 Manual De Usuario

Unusual display of
operating panel
The motor doesn't work
after pressing start key
Burnt smell from the
machine
None of the above
problems
7

Packing List

th
Number
Versión 08 Enero 2018
1. It may be because of the interference of power grid, please
shut down and start it after 1 minute, and then the display will
be ok.
1. The electric control circuit is broken. Please change the
electric control board.
1. Cut off the power.
2. Check whether the motor is burnt
3. Check whether the electrical components are burnt
4. Rotate the driving shaft with a hand, if it can't drive smoothly,
please contact Nahita Technical Service.
1. Please contact Nahita Technical Service.
Packing list of the Low-speed centrifuge
1 low-speed table-top centrifuge
2
3
4 service manual (English and Spanish)
Please check in time if there's anything wrong when
you open the package, if so, please kindly contact Nahita
in time.
Name
power cord
angle rotor 12x15 mL
Qty
1set
1pc
1pc
1pc
Pág. - 46 -