Drive Unit - WMF KULT X Instrucciones De Uso

Drive unit

You can variably set the speed of the powerful motor on the selector switch (7)
of the drive unit (6).
The motor runs at maximum speed as long as the PULSE button is held down.
This is particularly useful for repeated mixing before pouring out or when
crushing ice cubes.
In order to press the PULSE button, the selector switch (7) must be on the P
position or the device must be in operation.
Attention: it is only possible to switch the mixer on if the glass jar (3) is fitted
correctly. A safety shutdown feature ensures the device cannot be used without
the glass jar (3).
Glass jar
The cap (1) in the lid (2) can be removed by turning it clockwise. It can then be
used as a measure (10/30/50 ml).
The glass jar (3) can be dismantled, especially for cleaning. To do so, place the jar
on the table with the opening facing down and rotate the blade assembly (5)
clockwise (see diagram).
You can now remove the blade assembly (5) and the sealing ring (4).
To assemble, begin by attaching the sealing ring (4) to the blade assembly (5).
When doing so, make sure the sealing ring (4) is fitted properly on the blade
assembly (5). Then, place the blade assembly (5) into the glass jar (3) and turn
anticlockwise until tightly fitted.
Note: In order to ensure the tightness of the glass jug, the blade unit must be
screwed on tightly. The blade unit is easier to tighten if you apply a few drops of
cooking oil on the sealing side of the glass jug (see figure).
12