Using the device
Clean the glass jar (3), lid (2) and cap (1) before using for the first time. Make sure
that you do not injure yourself on the sharp blade. Place the glass jar (3) on the
drive unit (6).
Add the ingredients, close the glass jar (3) with the lid (2) and cap (1) and set the
selector switch (7) to the desired operating mode.
Speed
Use
low
Instant drinks, soft fruits and cocktails
(min)
with alcohol
low
Milkshakes
(min)
medium
Soups, milkshakes with harder fruits,
sauces, baby food, vegetables
high
Nuts, hard cheese, dry bread
(max)
Additional ingredients may be added while the motor is running. To do this,
simply remove the cap (1).
Crushing ice cubes
Insert up to 10 ice cubes and close the glass jug with the lid
and cap. Put the selector switch (7) on the P position and hold the PULSE button
down for a few seconds.
Once the ice cubes are on the bottom of the glass jug again, you press the PULSE
button down again for a few seconds again. Repeat the process until the crushed
ice has the desired consistency.
General information
1.5 l is recommended as the maximum fill level. Filling above this level may lead
to overflowing depending on the consistency of the ingredients.
As soon as the contents have been processed, switch off the device. Never oper-
ate the device empty. Allow the device to cool down following the maximum
operating time so that the motor is not overloaded.
Tip: Especially with liquid foods, we recommend reducing the fill capacity to
facilitate pouring.
Always set the selector switch to the Off position 0 before removing the glass jar
(3).
Attention! Risk of injury! Always wait for the blades to come to a standstill
before removing the lid (2). Do not reach into the device before the power
plug has been unplugged. Completely empty the glass jar (3) following use. Do
not leave any liquid in the jar (3).
Maximum time
40-60 s
1 – 2 min
1.5 – 2 min
40-60 s
13