Operation Of Your Blood Pressure Monitor; Inserting The Batteries - Microlife 3AA1-1 Instrucciones De Uso

b) Upper arm cuffs:
Type S101 for arm circumference 22–30 cm or
Type S102 for arm circumference 30–38 cm
Please Note:
Do not force cuff connection into the opening. Make sure the cuff connection is not pushed
into the AC adapter port. If the cuff is too small, call

4. Operation of your blood pressure monitor

4.1. Inserting the batteries

After you have unpacked your device insert the batteries. The battery compartment is
located on the back side of the device (see illustration).
a) Remove cover as illustrated.
b) Insert the batteries (4 AA, 1.5 V), following the
indicated polarity. (+ -)
c) If the low battery indicator appears in the
display, the batteries are discharged and the
unit will not function.
d) If batteries are inserted incorrectly, the display
may function eratically or not at all.
Check battery polarity.
11/ 13/
8 " -11 " (included)
16 16
13 /
11 " -15" (order as a special accessory)
16
for further information.
Low Battery Indicator
6