Taking A Blood Pressure Measurement - Beurer BM 49 Instrucciones De Uso

7.3 Selecting the memory
• Switch on the device with the
START/STOP button
When the device is switched
off, the time and date are
permanently displayed.
• Select the desired user memory
by pressing the function
buttons .
You have 2 memories, each with
60 memory spaces to store the
measurements of 2 different people
separately.

7.4 Taking a blood pressure measurement

• As described above, attach the
cuff and adopt the posture in
which you want to perform the
measurement.
Voice output when voice function
is active
The device is ready for use.
. You may start measuring.
User memory 1
User memory 2
Voice output when voice function
is active
• Switch on the device with the
START/STOP button
• A display check is performed,
during which all display segments
light up.
• Start the device with the
START/STOP button
. The memory space that will
be used is displayed.
The cuff is inflated to 190 mmHg.
The cuff's air pressure is slowly
released. If you already recognise
a tendency for high blood pres-
sure, you should reinflate the cuff
and increase the cuff's pressure
again. As soon as a pulse is de-
tected, the symbol flashes.
You can cancel the measure-
ment at any time by pressing
the START/STOP button
11
Voice output when voice function
is active
The device is ready for use.
. You may start measuring.
.