Initial Use; Inserting The Batteries - Beurer BM 49 Instrucciones De Uso

Information on the display:
1. Inflate ,
release air
2. Systolic pressure
3. Memory display: average
value ( ), morning (
evening ( )
4. Diastolic pressure
5. User memory
6. Calculated pulse rate
7. Cardiac arrhythmia symbol
8. Time and date
9. Risk indicator
10. Memory space number
11. Battery replacement symbol

6. Initial use

6.1 Inserting the batteries

• Open the battery compartment lid.
• Insert four 1.5 V AA (alkaline type LR6)
batteries. Make sure that the batteries
are inserted the correct way round in
accordance with the markings. Do not
use rechargeable batteries.
11
10
),
9
8 7
4 x AA (LR6) 1,5 V
• The device announces that it is ready to use and that you can start
1
taking the measurement. This voice output is in the language that was
pre-set when the device was supplied to the customer – in this case
2
English.
3
You can change the language at any time in the settings. To do so,
follow the instructions in the "Setting the date, time and language"
4
section of this chapter.
• Carefully close the battery compartment lid again.
5
• With inserted batteries, the device permanently displays the date and
6
time, even when in standby mode.
If the low battery indicator
can be performed. The device will announce: "Battery low." Please
replace all batteries. Once the batteries have been removed from the unit,
the date, time and language must be set again.
6.2 Setting the date, time and language
It is essential that you set the date and time. Otherwise, you will not be
able to save your measured values correctly with a date and time and
access them again later.
The time is displayed in the 24-hour format.
The device also has a voice output function, which is available in
4 languages. The device language is set to English when supplied
to the customer.
7
and appear, no further measurements