Cleaning And Maintenance - Beurer BM 49 Instrucciones De Uso

• Press the memory button .
The average value of all saved
measured values in this user
memory is displayed first
• If you press the memory button
again, the average value of
the morning measurements for
the last 7 days will be displayed
(morning: 5 a.m. – 9 a.m.,
display ).
• If you press the memory button
again, the average value of
the evening measurements for
the last 7 days will be displayed
(evening: 6 p.m. – 8 p.m.,
display ).
• If you continue to press the
memory button , the most
recent individual measured
values are displayed in turn
with the date and time.
Voice output when voice function
is active
Average count:
Systole ... mmHg
Diastole ... mmHg
.
Heart rate ... beats per minute
According to the WHO
guidelines your blood pressure
is...
Memory space ...
Systole ... mmHg
Diastole ... mmHg
Heart rate ... beats per minute
According to the WHO
guidelines your blood pressure
is...
• The measured values of the
relevant user memory can be
deleted by switching on the
device, selecting the desired
user memory and pressing and
holding the function buttons
and for 5 seconds at the same
time.
• The device will then switch
directly into standby mode
(time mode).

8. Cleaning and maintenance

• Clean the device and cuff carefully using only a slightly damp cloth.
• Do not use any cleaning agents or solvents.
• Under no circumstances hold the device and cuff under water, as this
can cause liquid to enter and damage the device and cuff.
• If you store the device and cuff, do not place heavy objects on the
device and cuff. Remove the batteries. The cuff line should not be bent
sharply.
14
Voice output when voice function
is active
All the counts in the memory
have been erased.