Technical Specifications - Beurer BM 49 Instrucciones De Uso

• The codes below are printed on batteries containing harmful
substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury
Repairing and disposing of the device
• Do not open the device. Failure to comply with this instruction will void
the warranty.
• Do not repair or adjust the device yourself. Proper operation can no
longer be guaranteed in this case.
• Repairs must only be carried out by Customer Services or authorised
suppliers. Before making a claim, please check the batteries first and
replace them if necessary.
• Please dispose of the device in accordance with EC Directive –
WEEE (Waste Electrical and Electronic Equipment). If you have
any questions, please contact the local authorities responsible
for waste disposal.

12. Technical specifications

12.1 Device
Model no. BM 49
Measurement method Oscillometric, non-invasive blood pressure
measurement on the upper arm
Measurement range
Display accuracy
Measurement uncertainty
Memory
Dimensions
Weight
Cuff size
Permissible operating
conditions
Permissible storage and
transport conditions
Power supply
Battery life
Classification
The serial number is located on the device or in the battery compartment.
Technical information is subject to change without notification to allow for
updates.
16
Cuff pressure 0-300 mmHg,
systolic 50-250 mmHg,
diastolic 30-200 mmHg,
pulse 40-180 beats/minute
Systolic ± 3 mmHg, diastolic ± 3 mmHg,
pulse ± 5% of the value shown
Max. permissible standard deviation
according to clinical testing: systolic 8 mmHg/
diastolic 8 mmHg
2x60 memory spaces
L 96 mm x W 146 mm x H 59 mm
Approximately 264 g (without batteries)
22 to 36 cm
+5°C to +40°C, 15%-90% relative humidity
(non-condensing)
-25 °C to +70°C, ≤93% relative humidity,
700 – 1060 hPa ambient pressure
4 x 1.5 V AA batteries (alkaline type LR6)
For approx. 250 measurements, depending on
levels of blood pressure and pump pressure
Internal supply, IP21, no AP or APG,
continuous operation, application part type BF