Pedestal Assembly; Wall Mounting - Cadel CLOE Manual De Instalación

9.4

PEDESTAL ASSEMBLY

EN
Fig. 15 - Assembling the pedestal
• Lay the stove on the floor horizontally.
• Place pedestal and, using the Allen key provided, tighten the no.4 M6 screws under the pedestal (see
Fig. 15 page 68).
• Put the stove upright (see Fig. 16 page 68).
9.5

WALL MOUNTING

The stove is suitable for wall mounting. The can be attached to a load-bearing wall in masonry (NOT
plasterboard, wood, etc...) suitable for the entire weight of the stove.
• It is obligatory to install the stove away from walls and/or pieces of furniture, with a minimum air flow
of 300 mm on the sides to enable an eficient appliance cooling and a good distribution of heat in the
room (see Fig. 17 page 68).
• For safety fire regulations the distances from flammable or sensible to heat objects (sofas, pieces of
furniture, wooden covering, etc...) must be respected, has described in Fig. 17 page 68.
• If there are highly flammable objects (curtains, fitted carpet, etc...), all these distances must be further
increased with 1 meter.
68
LEGEND
1
2
3
In some countries also masonring load-bearing walls are considered flammable.
Fig. 17 - Wall mounting
Fig. 17 page 68
Stove
Minimum lateral distance = 300 mm
Minimum front distance = 1000 mm
Fig. 16 - Stove on the pedestal
CLOE - SQUARE