Magic Chef MCSMC10S7 Manual De Uso página 25

Display shows "noPr".
Display shows "Ovht".
Display is blank after
the cooker is plugged
in.
Rice is only half cooked
or is too hard.
Rice is too soft.
Sporadic beeping when
the multicooker is
cooking.
Occasional ticking
sound.
Working pressure was not
reached during the preheating
stage.
Overheating was sensed in the
inner pot.
No power connection or bad
power source.
Multicooker electrical fuse is
blown
Not enough water added.
Lid opened early.
Too much water added.
Multicooker is overheating
and has reduced the heating
temperature. It may not reach
the cooking pressure needed.
The heating element turning
on and off
Bottom of the inner pot on the
outside is wet.
If steam is leaking from the lid, see problem 3, 4, 5, and 6. If
steam is not leaking from the lid and you are cooking frozen
food, run the current program again.
Cancel the current program and see if the food at the bottom
of the pot is burned.
Examine the power cord to make sure the cord isn't damaged.
Check the outlet to make sure it is active.
Contact customer service.
Add more water according to the proper rice to water ratio.
Once cooking is finished leave the lid on for 5 minutes.
Adjust rice to water ratio according to rice directions.
Starch or other food has accumulated at the bottom of the
inner pot and have clogged heat from dispersing.
This is normal.
Make sure the inner pot is dry before cooking.
25