Bresser 4Cast CS Manual De Uso página 30

In the event the Meteotime icon change to
interference on the unit. The sources of interference may come from the electronics equipment
such as TV-set, computers, household machines etc. It may also be due to lots of concrete, metal
parts and electrical equipment in the building. It may also be due to your living area if it is very
far away from the Radio-controlled clock tower (Mainfl ingen – Coordinates 50°01' North, 09°00'
East.
You can use the „TEST" function to look for a better location.
• Press „TEST" button, „SCAN" is shown in the Information Window.
• Take the unit and fi nd a good location.
• fl ashing: The test is running and the Meteotime signal reception is good. You are able to
leave the device in this position.
fl ashing: The test is running and the Meteotime signal reception is poor. You need to keep
on looking for a better location.
• The test lasted for around 1 minute. You can restart the test with the [TEST] key at any time,
and also discontinue the test by pressing the [TEST] key.
• Scan A: that "A" means the reception quality should be 0=bad.....9=very good
SWITCH CITY
• After switching on, the weather station searches for the Radio controlled Time signal as well as
the MeteoTime signal. After it has successfully received the MeteoTime signal, the information
window shows the default city „FRANKFURT.M".
• You are able to press [ SET ] to switch from the display of the City, Time and Date to week
alarm, single alarm or pre-alarm for Frankfurt am Main.
SELECT THE COUNTRY AND CITY / CITIES
• Press and Hold [ SET ] for 3 seconds, in the information window, „COUNTRY" is shown, and
then press [ ▲ ] or [ ▼ ] key to select the country.
For example, if you see in the information window „D/GER", that means you have selected
"Germany".
• Press [ SET ] key to confi rm the Country. Assuming you have selected Germany, then the
information window will show [CITY].
• Then, press [ ▲ ] or [ ▼ ] key to select the city, and the city name will be shown in the infor-
mation window. Example: „FRANKFURT.M" means the city 'Frankfurt am Main'. Press [SET] to
accept this value. From now on, the information box will display the selected city.
ALARM TIME
, that means there are potential sources of
TIME & DATE
30