Bresser 4Cast CS Manual De Uso página 39

SETTING THE PRE-ALARM
• The pre-alarm (Pre-ALM) can be set when the alarm for weekdays (W) or individual days (S) is
set.
• Press the [SET] button for 3 seconds after entering the value in the setting of Pre-Alarm in
Display Mode „PRE-ALM".
• The number 15 fl ashes and this means that this alarm will now sound 15 minutes before the
weekday alarm or single alarm.
• Use the UP (▲) or DOWN (▼) button to select the pre-alarm interval between 15 and 90
minutes.
• Press the [SET] key to confi rm settings and to exit.
SPECIFICATION ON IN/ OUTDOOR TEMPERATURE AND HUMIDITY INNEN / AUS-
SEN MEASUREMENT
Temperature Display Range
Temperature Resolution
Temperature Accuracy
RF Transmission Frequency
Maximum No. of Remote units
RF Transmission Range
Relative Humidity
Humidity resolution
Main Unit is powered by Re-chargeable lithium-ion battery and AC adaptor.
Outdoor sensor is powered by 2x AA batteries.
-20 °C to +60 °C
0.1 °C
+/-1 °C (within +5 ºC to +40 ºC)
433Mhz
3
maximum 30 meters (open area)
R.H. 30% to 80%
1% R.H
39
GB/IE