Snooze Function - Bresser 4Cast CS Manual De Uso

MAXIMUM AND MINIMUM TEMPERATURES
• The maximum and minimum recorded indoor and outdoor temperatures and humidity will be
automatically stored in the memory of the main unit. Press [ MEM ] button, the respective
indicators, [ MAX ] or [ MIN ] will then be displayed.
• To clear the memory, hold [ MEM ] button for 3 seconds. The maximum and minimum
temperature records will be erased.
ALARM FEATURE
There are three time alarms available on the main unit:
Weekday Alarm [
• The alarm sound will be activated and the icon will fl ash on weekdays (Mo to Fr) when it is
armed and the alarm time is reached.
Single Alarm [ ]
• The alarm sound will be activated and the icon will fl ash when it is armed and the alarm time is
reached. Once it fi nished, it will be disabled automatically
Pre-Alarm [
• The pre-alarm will be activated and the icon will fl ash if the temperature of Channel 1 is falling
to +0°C or below.
It is programmable 15, 30, 45, 60 or 90 minutes earlier than the weekday alarm or single alarm
time.
HOW TO SET ALARM
Press [SET] button to toggle between weekday alarm, single alarm or pre-alarm.
If the alarm is disarmed, the time will be displayed as "OFF W-ALM"
• Hold [SET] button for 3 seconds, the hour digits will blink.
• Enter the hour by using UP [▲] or DOWN [▼] button.
• Press [SET] button to confi rm, the minute digits will blink.
• Enter the hour by using UP [▲] or DOWN [▼] button.
• Press [SET] button to exit and the respective alarm icons [
be activated.

SNOOZE FUNCTION

• When alarm is on, swing your hand near the motion sensor, alarm will be stopped
temporarily and the alarm icon will start fl ashing. The alarm will sound again after 4 minutes.
HOW TO STOP ALARM
• When alarm is on, the respective alarm icons [
or DOWN [▼] button to stop the alarm immediately.
• To turn off the alarm, press UP [▲] or DOWN [▼] button to change the alarm time
display as "OFF W-ALM". If no button is pressed, the alarm will be sounded for 2 minutes and
then deactivated automatically.
]
]
] , [
] and [ ] will be fl ashing. Press UP [▲]
38
] and [ ] will