Bresser 4Cast CS Manual De Uso página 32

PERSONALIZE A PLACE NAME
• Press and hold [ SET ] for 3 seconds, In the information window, is shown, and then press [
▲ ] or [ ▼ ] to select the country. For example, let's said you had selected country Germany
which is represented in „D/GER".
• Press [ SET ] key to confi rm the Country. (let's say we select Germany right now), then the
information window will show „CITY".
• Then, press [ ▲ ] or [ ▼ ] key to select the city, and the city name will be shown in the infor-
mation window such as means city „FRANKFURT.M", and you would to enter a new city which
is near the region of Frankfurt am Main
• Press the [ MEM ] key ; a cursor fl ashes on the fi rst position of the Information Window.
Then following input commands then apply:
KEY Function
[ ▲ ] or [ ▼ ]
Selection of a letter
[SET] <1x> Accept the selected letter and jump to the next position.
OR
<2> If you have not entered any letter (in other words, if only the cursor is fl ashing
at the last position), confi rm the entry with this key and your place will also be
included in the memory with immediate effect
TEST One position back in the data entry process.
** The place that you have selected to enter your own description will still exist under its own
name.
• Press [ SET ] key to confi rm and exit.
SET THE TIME ZONE AND LANGUAGES
• Press and hold [ SET ] for 3 seconds, „COUNTRY" is shown in the information window.
• Press [ SET ] again, then „
or [ ▼ ] key to adjust the time zone.
• Press [ SET ] again, then the LANGUAGE will be shown in the information window, press [ ▲
] or [ ▼ ] key to select your desired language. There are total seven languages for selection,
namely German, English, Spanish, French, Italiano, Dutch, Swedish
• Press [ SET ] on last time, „EXIT" will be shown in the information window. After 4 seconds, it
will change to the City-Date-Time Mode
Remark: If you do not have any selection into the Setup mode up to 30 seconds, it will
automatically exit the setup mode. The Information Window will show City/ Date & Alarm
CHANGE DATA DISPLAY FROM THE CURRENT DAY TO THE FOLLOWING DAY
Move your hand over the motion sensor or press [ ▲ ] to switch the display of weather forecast
from current day to the following day.
" is shown in the information window, press [ ▲ ]
32