• KUBOTA D 902
Consult the Use and Maintenance manual of the motor.
OIL SHELL SPIRAX S3 T
• BRIGGS & STRATTON 23 HP W-TWIN
Consult the Use and Maintenance manual of the motor.
OIL SHELL x 200 SAE 30
16.2 ADD COOLING FLUID
Not present on model PG230.
16.3 ADD HYDRAULIC SYSTEM OIL
OIL SHELL SPIRAX S3 T
16.4 ADD FRON AXIAL OIL
OIL SHELL SPIRAX S3 T
16.5 BATTERY
See figure16.5
Check periodically the electrolyte level and, if necessary, add distilled water, checking the level indicated on the
battery body.
16.6 AIR FILTER
Periodical checks.
16.7 RADIATOR NET
Periodical cheks.
Not present on model PG230.
16.8 MOTOR NET
Periodical checks.
16.9 MOTOR OIL FILTER
Consult the use and maintenance manual of the motor.
Remove the bulkhead A, before maintaining the motor oil filter.
16.10 CARBURANT FILTER
16.11 TYRE PRESSURE
If the front tires are inflated at different pressure, the blades will mow the grass at different heights
16.12 BELT TENSION ADJUSTEMENT
- After the first 5÷10 hours of work, adjust the P.T.O. belts tension:
1) Fully disengage the P.T.O. and mark with a felt-tip the position of tie-rod T.
2) Insert the P.T.O. and check if the value marlek is 10-12 mm. If it is different, act on the relevant screw A and
to the screw B.
Pay attention to the dimensions of the eye of the cylinder.
16.13 CLEANING THE MACHINE
16.14 BASKET OVERTURN, CYLINDER GREASE NIPPLE
With elevator.
16.15 BASKET OVERTURN, CYLINDER GREASE NIPPLE
Without elevator.
16.16 PDP GREASE NIPPLE
See figure 16.2
See figure 16.3
See figure16.4
See figure 16.6
See figure 16.7
See figure 16.8
See figure 16.9
See figure 16.10
See figure 16.11
See figure 16.12
See figure 16.13
See figure 16.16
See figure 16.14
See figure 16.15
EN
35