Road Transport; Safety Stickers; Notes - Gianni Ferrari PG 200 Serie Manual Tecnico

19. ROAD TRANSPORT

The PG-SR machine, since they are accompanied by road approval certificate(*), have the possibility of circula-
ting on public roads provided the following rules are observed:
-The machine must obligatorily be accompanied by a regular registration, a registration document (log book), a
correctly mounted number plate and an insurance against road accidents (car liability insurance).
-The driver of the machine must carry a regular driving licence (at least, type B).
-The lighting installation and the braking devices of the machine must be correctly operating and in perfect
efficiency.
-All the lighting devices must be fully visible. Please keep in mind that the rotating lamp device (blinker) must
always be on, even during day time.
-The PG-SR machine can circulate with and without the equipments attached (**). When circulating on a road
without equipment, it is recommended to keep the front arms of the 2-point attachment on the engine fully
lifted. When the road trasfer is made with equipment connected, it is obligatory to keep the same entirely lifted
and fastened to the machine body by means of the mechanical lock.
-The machine, in its front part, is fitted with a tow bar that can be exploited in case of troubles with the machi-
ne.
-The technical limits and conditions expressly indicated in the registration document of the machine must always
be respected.
-As to the road traffic rules, the standard Rules of the Road apply.
(*): Only for the versions where this is foreseen.
(**): The equipments that can equip the machine during road circulation are expressly indicated in the registration
document.
Before travelling on the road opened to traffic, you should become familiar with all the controls
of the machine.

20. SAFETY STICKERS

21. NOTES

A) Please contact our authorised dealer for anything that is not dealt with in this manual.
B) Always keep this technical handbook in a safe place for future reference. It can be modified without prior
notice or any additional obligations in order to improve the product. Reproduction or translation of any part of
this manual is not allowed without the owner's prior written consent.
See figure 19.
See figure 20.
EN
37