Pedal Greasing; Hydraulic Installation Filter; Changing. Hydrostatic Drive Oil And Hydraulic Syst; Hydrost. Drive And Hydraulic Syst. Oil Level - Gianni Ferrari PG 200 Serie Manual Tecnico

16.17 PEDAL GREASING

See figure 16.17
See tab. maintenance.
See figure 16.18

16.18 HYDRAULIC INSTALLATION FILTER

16.19 CHANGING. HYDROSTATIC DRIVE OIL AND HYDRAULIC SYST.

See figure 16.19

16.20 HYDROST. DRIVE AND HYDRAULIC SYST. OIL LEVEL

See figure 16.20

16.21 TRAMS. AMD MOWER OIL LEVEL

See figure 16.21

17. EXTRAORDINARY MAINTENANCE

For the extraordinary maintenance of the machine, contact only an authorised service center.

18. INACTIVITY OF MOWER DECK

In case the PG-SR machine has to remain idle for a long period of time, it is convenient to carry out some ope-
rations to ensure its efficiency when reused and the duration of the same for years:
-Disconnect the equipment from the engine and follow the operations indicated in the relevant use and mainte-
nance manual to prearrange it for "out of service".
-Carry out all the indications given in the use and maintenance manual of the motor prearrange the same for
"out of service".
-Remove the battery, recharge it and store it in a dry and ventilated place.
-Clean carefully the engine with an eye in particular where there are incrustations due to soil and grass resi-
dues.
-Carry out the of "ordinary maintenance" operations described above and,if necessary, carry out also the "ex-
traordinary maintenance".
-Park the engine in a dry and ventilated place and cover it with a suitable non-impermeable protection sheet.
-During the period of inactivity, always maintain the pressure indicated for the tyres and, periodically, change the
resting point of the tyres on the ground.
36