Z I PP I E VO YA GE
W. TRAY ARM HEIGHT ADJUSTMENT
a. Loosen or remove the two button head screws (A) to raise or lower the tray support
arm receiver bracket (B).
b. Adjust tray support receiver bracket to the proper height and tighten the screws.
c. Insert the tray arm into one of 3 possible height positions on the receiver bracket.
d. Repeat the procedure for opposite side making sure tray supports are equal in height
adjustment so that the tray can be installed easily.
X. TRAY INSTALLATION AND ADJUSTMENT
a. Slide the tray over the tray supports, adjust depth and click into place.
b. Check that nut (C) is just loose enough so that the tray can be adjusted.
c. Knob (D) is loosened to adjust the depth of the tray and tightened on both sides to
hold the adjustment.
d. Adjust the angle of the tray by holding in both knuckle buttons (E) on the support
arms and raising the tray to desired angle, the tray should click in place for a positive
lock.
Using a pelvic positioning belt is critical for child safety when foot straps or shoe holders
must be used for therapeutic positioning needs.
Y. SHOE HOLDER FOOT STRAP ADJUSTMENT
NOTE - Shoe holders and optional foot straps are intended for therapeutic positioning needs only.
a. Engage the wheel locks and seat the child.
b. Loosen the shoe holder straps (F)
c. Child should be wearing shoes for this step. Place child's foot into shoe holder and
snap the two shoe holder straps into place.
d. Keep the straps as loose as possible and only tighten enough to maintain a therapeutic
position.
Z. VENT/BATTERY TRAYS (OPTIONAL)
a. There are two types of Vent platforms. A rear mount or dovetail vent
mount (A) which has a weight capacity of 15lbs, and an under frame
vent tray (B) which has a weight capacity of 50lbs.
b. The vent platforms attach easily to the Voyage base frame.
c. Tie down straps are included with this option to secure the equipment.
65
(ADVANCED)
66
WARNING
67
(Option)
68
27
IX. DEALER SERVICE & ADJUSTMENT
E
F
65
66
67
68
MK-100377 Rev. A