Beem Fresh-Aroma-Perfect Deluxe V2 Manual De Instrucciones página 22

18 EN
Setting the coffee strength
1. Press the
edly until the desired coffee strength appears
in the display.
The following settings are possible:
: mild, medium and strong.
NOTE
► The set coffee strength will be stored
until either a new coffee strength is entered
or the plug is removed from the socket for
more than a minute.
Brewing very strong coffee
1. Press the button (29) to brew very
2 - 4
strong coffee (similar to espresso). 2-4 ap-
pears on the display. Pressing the
button (29) switches the number of cups be-
tween 2 and 4.
NOTE
► This function can be activated only if 2
or 4 cups of coffee have been set.
► Press the button (28) to switch off
2 - 10
this function. 2-4 is no longer displayed.
Setting the grinding fineness
(image A3)
The grinding fineness is set by turning the
coffee bean compartment (2) left or right .
1. Turn the coffee bean compartment (2) so
that the arrow of the scale points to the posi-
tion of the desired grinding fineness (4).
You can set 5 different levels:
Completely left: finest grind.
‹
Completely right: coarsest grind.
‹
NOTE
► When changing the grinding fineness,
coffee ground to the previous fineness
setting is still in the grinder shaft. If neces-
sary, clean the grinder shaft as described
in the section Cleaning the grinder shaft
(pag. 21).
button (27) repeat-
2 - 4
BEEM - Elements of Lifestyle
Activating the reminder
for changing the
activated carbon filter
NOTE
► For this function, the the appliance
must remain connected to the mains and
the time set as described in the section
Setting the time (pag. 17).
1. Press the button (30) to activate the
reminder for changing the activated carbon
filter.
In the display, the
symbol will start flashing after 70 coffees were
brewed. Replace the activated carbon filter as
described in the section Replacing the acti-
vated carbon filter (pag. 21).
Removing/replacing the
coffee jug lid
(images B1, B2)
The appliance is equipped with a double-
walled stainless steel thermos jug and a lid.
NOTE
The bottom of the jug gets warm during
the brewing process.
► Always place the thermos jug onto a
heat-resistant base.
To remove the lid, proceed as follows:
1. Turn the lid anticlockwise.(image B1). The
lid can now be removed.
To fit the lid, proceed as follows:
1. Put the lid onto the jug so that the handle
is pointing to the right and turn it clockwise
until it stops. The lid is now closed.
To pour coffee, proceed as follows:
1. Press and hold down the release lever in
order to pour out the the contents of the ther-
mos jug (image B2).
Drip protection
When the appliance is in operation, the
‹
filter compartment must be closed and the
thermos jug must be standing properly with
lid under the filter compartment. The lid of the
thermos jug presses the drip protector up-
wards, and the coffee can flow from the filter
through the lid into the thermos jug.
symbol appears. The