After Brewing; Cleaning And Maintenance - Beem Fresh-Aroma-Perfect Deluxe V2 Manual De Instrucciones

20 EN
Cancelling the brewing process
1. Press the button (26) or the
button (21) to cancel the brewing process
and switch off the appliance. The power in-
dicator (25) goes out, the appliance is
switched off.
Preparing coffee using the preset
timer
NOTE
► To brew coffee using the timer, the
clock must be set as described in the sec-
tion Setting the time (page 17).
Programming the preset time
1. Press the
down for approx. 3 seconds. The power indi-
cator (24) starts flashing.
2. Use the button (31) and
(32) to set the desired start time.
For brewing coffee with coffee powder:
3. Also press the
the power indicator
flash. The power indicator
4. Fill the water tank with water and the cof-
fee powder into the permanent filter.
Brewing coffee with coffee beans:
3. Make sure that the power indicator
(25) does not light up. If necessary,
press the button (26) as long as the
power indicator
The power indicator
4. Set the number of cups, the strength of
the coffee and the grinding fineness.
5. Pour water into the water tank and fill the
coffee bean compartment with coffee beans.
6. Insert the permanent filter.
Terminate the programming process .
1. Press the
tivate the timer function. You can also wait
until the power indicator
flashing in order to press the
(23). The power indicator
up continuously and the timer function is ac-
tivated.
When the preset time is reached, the appli-
ance is switched on automatically.
Stopping the preset timer
1. In order to stop the timer, press one of the
following buttons:
button (23) and hold it
button
button (26) as long as
(24) continues to
(25) lights up.
(24) continues to flash.
(25) goes out.
button (23) again to ac-
(24) stops
button
(24) lights
BEEM - Elements of Lifestyle
–
Button (23)
The power indicator
–
Button (20)
The power indicator
and the appliance starts brewing coffee
with coffee beans.
–
Button (26)
The power indicator
and the appliance starts brewing coffee
with coffee powder.

After brewing

Carry out the following operations after each
use of the appliance in order to retain proper
function of the appliance and prevent mould
from forming:
Emptying / cleaning the filter
1. Remove the thermos jug from the hot-
plate.
2. Press the unlocking button (5) to open the
filter compartment (8).
3. Remove the filter insert (11) with the per-
manent filter (10) from the filter compartment
(8).
4. Wash the permanent filter, the filter insert
(9) and drip protector.

Cleaning and maintenance

Cleaning
Before beginning any work, pay attention to
the safety instructions in the section Safety
precautions (pag. 13)!
1. Clean the filter, the filter insert (9) and the
thermos jug (7) after each use.
2. If required, clean the coffee bean com-
partment (2) and its lid (1) with damp cloth.
3. Wipe the housing with a damp cloth. Use
washing-up liquid to remove any stubborn
stains.
NOTE
► The thermos flask is not suitable for
dishwashers and may not be put into or
immersed in dishwater. Rinse the thermos
flask after each use. Coffee grounds in the
thermos jug can be more easily removed
using a denture cleaner, hot vinegar solu-
tion or baking powder. Rinse carefully after
cleaning.
(24) goes out.
(24) goes out
(24) goes out