Storage; General - Beem Fresh-Aroma-Perfect Deluxe V2 Manual De Instrucciones

Ocultar thumbs Ver también para Fresh-Aroma-Perfect Deluxe V2:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 38
BEEM - Elements of Lifestyle
Cleaning the grinder shaft
(images C1, C2)
It is possible that the grinder shaft can be-
come blocked during the grinding process. In
this case, clean the grinder shaft (13):
1. Press the locking button (on the
bol) with a sharp object and pull the lid for-
wards (image C1).
2. Clean the grinder shaft (13) with the
cleaning brush supplied (image C2).
3. Press the locking button and push the lid
back onto the grinder shaft.
Replacing the activated carbon filter
(images C3, C4)
1. Press the
button (30) to switch off the
reminder for replacing the activated carbon
symbol disappears from the
filter. The
display.
2. Remove the holder for the activated car-
bon filter (14) from the water tank (12). Open
the compartment flap (15) and remove the old
activated carbon filter (image C3).
3. Remove the new activated carbon filter
(16) from its plastic packaging and thoroughly
rinse under running water in order to remove
any potential production residues.
4. Insert the new activated carbon filter into
the holder and close the compartment flap.
5. Insert the activated carbon filter (14) into
the recess in the water tank (image C4).
6. Press the
button (30) to reactivate the
reminder for changing the activated carbon
filter.
NOTE
The reminder for changing the acti-
vated carbon filter is only active when the
symbol appears on the display but is not
flashing.
Descaling
In order not to impair the service life of the
appliance and the quality of the coffee, the
appliance has to be descaled at regular inter-
vals. The descaling intervals depend on the
water hardness. We recommend descaling
every 6 weeks.
1. Fill the water tank with water to the 10
mark and citric acid or vinegar essence (ap-
proximately 5 % acidic solution).
2. Press the
cup full to run through.
3. Interrupt the brewing process for 10 min-
sym-
utes and allow the entire descaling solution
to run through.
4. Empty the thermos jug (7).
5. Allow two tank fills of clear water to run
through the appliance for rinsing.
6. Wash all removable parts with warm
water and washing-up liquid before brewing
coffee again.
NOTE
If you use a commercially available
descaling agent, observe the manufac-
turer's instructions for use.
If the appliance is severely scaled, it
may be necessary to repeat the descaling
process.
If you do not intend to use the appliance for a
longer period of time, switch it off and pull the
plug out of the mains socket. Clean the ap-
pliance as described in the section Cleaning
and maintenance (pag. 20).
Store the appliance and all accessory parts
at a dry, clean and frost-free location which is
protected against direct sunlight.
In addition to the statutory warranty obliga-
tion, BEEM also grants an extended manu-
facturer's guarantee for some products. If
this guarantee applies, you will find the
corresponding information either on the
product-specific packaging, in the advertising
materials or on the BEEM web page for the
respective product.
For commercial or equivalent use, e.g. in ho-
tels, guest houses or communal premises, or
if the customer is not a consumer as defined
by the German Civil Code, the guarantee
period is 6 months. This does not infringe the
warranty disclaimer.
button (26) and allow a

Storage

General

Guarantee
EN 21

Publicidad

Tabla de contenido
loading

Tabla de contenido