SCHUBERTH C4 Manual Del Usuario página 65

4. Check all around the anti-fog lens to make sure that it fits tightly and
evenly against the face shield. Only if this is the case will the anti-misting
properties function properly.
5. If you have not done so already, remove the protective film from the anti-
fog lens.
Removal
1. Before starting to remove the antifog lens, first lay the face shield on a
soft, clean cloth so that its top edge is facing you.
2. To reduce the pretensioning of the
antifog lens slightly if necessary, use the
balls of your thumbs to carefully bend
the face shield sufficiently apart while
applying pressure with your thumbs to
release the anti-fog lens and move it
approx. 2–3 mm forward.
3. Now grip the back of the anti-fog lens
with your index and middle fingers and
lift it off the face shield. In this position
you can easily remove the anti-fog lens
from the locking pin with your thumb.
4. You can now remove the anti-fog lens
from the face shield.
EN
63