SCHUBERTH C4 Manual Del Usuario página 76

C. THE HELMET
Urban position
In its second locking position, the face shield is automatically in urban position.
Air entering through the bottom gap flows over the inside of the face shield and
escapes through the opening at the top.
VENTILATION DEVICE 2 – INLET VENT IN CHIN AREA
(face shield ventilation)
The C4 features an air inlet in the chin section
for visor ventilation. Air flows through the open
air inlet regardless of riding position. A deflector
ensures that the air current ventilates the face
shield effectively even at low road speeds.
Press on the ventilation unit to open or close
the air inlet.
VENTILATION SYSTEM 3 –
HEAD VENTILATION
There is a large air inlet cowl with a three-stage
adjustable ventilation system on the top of the
helmet shell for ventilating the top of your head.
Air entering the helmet through this inlet cowl
is directed via channels to the top of the head.
Inside the helmet, the head padding system
enables direct contact between incoming air and
the surface of the head, thereby conducting the
heat away from the inside of the helmet quickly.
The ventilation is adjusted by means of a slide
on the air inlet cowl that is easy to operate even
when wearing gloves. Moving the slide backwards
to the first locking position produces partial
ventilation, moving it further back opens the air
inlet to its full extent.
74