Special Functions; Reset Functions - TECshow RAZOR 7R BEAM Manual De Usuario

use time will show on the display, press MENU button to exit.
Lamp On Time
Select Lamp On Time, press ENTER button to confirm, lamp
on time will show on the display, press ENTER button to con-
firm, use UP and DOWN button to select Exit or Reset Time,
press ENTER button to confirm. Press MENU button back to
the last menu or exit menu mode let the unit idle one minute.
Firmware Version
Select Firmware Version, press ENTER button to confirm,
firmware version will show on the display, press MENU but-
ton back to exit.

Reset Functions

Enter menu mode, select Reset Function, press ENTER but-
ton to confirm, use UP and DOWN button to select Pan/Tilt,
Shutter/Prism/Frost, Color, Gobo or All.
Pan/Tilt—Reset Pan/Tilt
Select Pan/Tilt, press ENTER button to confirm, use UP and
DOWN button to select Yes (the unit will run built-in program
to reset pan and tilt to their home positions) or No, press
ENTER button to store. Press MENU button back to the last
menu or let the unit idle one minute to exit menu mode.
Shutter/Prism/Frost—Reset Shutter/ Prism/Frost
Select Shutter//Prism/Frost, press ENTER button to confirm,
use UP and DOWN button to select Yes (the unit will run built-
in program to reset Shutter and Prism or Frost to their home
positions) or No, press ENTER button to store. Press MENU
button to exit.
Color—Reset Color
Select Color, press ENTER button to confirm, use UP and
DOWN button to select Yes (the unit will run built-in program
to reset color to their home positions) or No, press ENTER
button to store. Press MENU button to exit.
Gobo —Reset GOBO
Select Gobo, press ENTER button to confirm, use UP and
DOWN button to select Yes (the unit will run built-in program
to reset GOBO wheel to their home positions) or No, press
ENTER button to store. Press MENU button to exit.
All—Reset All
Select All, press ENTER button to confirm, use UP and DOWN
RAZOR 7R BEAM
ENGLISH VERSION
button to select Yes (the unit will run built-in program to re-
set all motors to their home positions) or No, press ENTER
button to store. Press MENU button to exit.

Special Functions

Enter menu mode, select Special Functions, press ENTER
button to confirm, use UP and DOWN button to select Fixture
Maintenance or Factory Setting.
Fixture Maintenance
Select Fixture Maintenance, press ENTER button to confirm,
use UP and DOWN button to select Interval or Remain Time.
Interval
Select Interval, press ENTER button to confirm, the interval
time will show on the display. Press MENU button to exit.
Remain Time
Select Remain Time, press ENTER button to confirm, the re-
maining time will show on the display, press ENTER button
to confirm, use UP and DOWN button to select Exit or Reset
time, press MENU button to exit.
Factory Setting
Select Factory Setting, press ENTER button to confirm, the
fixture will reset to factory settings and exit menu mode.
p. 14