8
Important: Fit the middle pot support first (be
careful to center it over the burner) and then the pot
supports on the side. The rounded corners of the
pot supports on the side must face out to the side.
(see picture).
Part/surface
Recommended cleaning method
Stainless steel
Clean with a soft cloth and some soapy
surfaces
water; polish dry with a soft cloth. Do not
use too much water to avoid water enter-
ing the appliance.
To remove stubborn residues or discol-
ouration because of the heat, you can
order a stainless-steel cleaner (order
number 00311499) from your specialist
retailer or our after-sales service.
Pan support
Carefully take off pan supports for clean-
ing. Soak in soapy water. Clean with a
brush and some detergent.
Be careful when cleaning around the
rubber rests to ensure they do not come
loose.
Rinse with clear water. Carefully dry pan
support before assembly.
Do not clean in a dishwasher!
Burner lid,
Take burner parts off for cleaning. Clean
burner ring,
in soapy water with a cloth and deter-
burner head
gent. Use brass polish to retain the origi-
(brass)
nal shiny surface of the burner ring and
the burner lid.
Port openings of the burner ring must be
kept free. Be careful not to loose the
small parts.
Do not clean in a dishwasher!
Wok burner
Clean with detergent and brush. Dry
head (enamel on
thoroughly before assembly.
cast iron)
Do not clean in a dishwasher!
Control panel
Clean with a soft, moist cloth and some
soapy water; do not use too much water.
Dry with a soft cloth.
Control knobs
Clean with a soft, moist cloth and some
soapy water; do not use too much water.
Caution!
Damage to the appliance: Do not pull off
the control knobs to clean them.
Cleaning the electrode
Soiled electrodes may cause malfunctions when igniting
or flame monitor disturbance.
If necessary clean with the included brush. Be careful
when cleaning electrodes, they are fragile, do not twist
or damage. Do not switch on the cooktop while
cleaning.
Burnt-on dirt
For hard-to-remove, burnt-on dirt, you can order a gel
grill cleaner from your specialist retailer or our after-
sales service (item number 00311761). It is suitable for
pan supports and the stainless-steel recess. If
necessary, let the dirt soak overnight. Follow the
instructions on the cleaning agent.
Caution!
Do not use the gel grill cleaner on the burner parts.
Burner discolouration
After extended use, the brass burner parts take on a
darker colour as a result of the oxidation process that
occurs naturally. The discolouration does not affect
their serviceability.
Do not use these cleaners
▯
Scouring or chemically aggressive cleaners
▯
Don't allow acidic cleaners (e.g. vinegar, citric acid,
etc.) to get on the frame or panel.
▯
Cleaners containing chlorine or with a high content
of alcohol
▯
Oven cleaner
▯
Hard and scratchy sponges, brushes or scouring
pads
▯
Thoroughly wash out new sponge cloths before
using them.
11