Creating A Disc With One Touch (One Touch Disc Burn) - Sony HANDYCAM DCR-SX40 Guía De Operaciónes

When the installation is completed,
following icons will appear.
Remow, the CD-ROM from your
computer.
PNB Guide
• Other icons may appear.
• No icon may appear depending on the
installation procedure.
• The "Handycam Handbook" is not
installed in this procedure (p. 44).
To disconnect your camcorder from the
computer
Click the _ icon at the bottom
right of the desktop of the
computer--_ [Safely remove USB
Mass Storage Device].
Creating a disc with
one touch
(OneTouch Disc Burn)
You can saw' movies and photos on a disc
by simply pressing "*_)(DISC BURN)
on your camcorder. Movies and photos
recorded on your camcorder that haw, not
yet been saved with One Touch Disc Burn
can be saw, d on a disc automatically.
• Install "PMB" befbrehand (p. 24), however, do
not start "PMB2
• Connect your camcorder to the wall outlet (wall
socket) using the AC Adaptor supplied for this
operation (p. 13).
• With '*_ (DISC BURN) on },our camcorder,
you can save movies and photos recorded on
the internal memory only.
Turn on your computer, and place
an empty disc on the DVDdrive.
• See page 24 fbr the type of discs you can
use.
• Ifa W other software than "PMB" starts
automatically, shut it down.
Turn on your camcorder, and
connect it to the computer using
the USB cable (supplied).
Touch [END] --_ [YES] on the
camcorder screen.
_ Disconnect the USB cable.
Press *:D(DISC BURN).
2;