Special Cord Set Instructions - Mr Coffee VB Serie Manual Del Usuario

BVMC-VB_11ESM1.qxd:133834
INTRODUCTION
Welcome and congratulations on the purchase of your new
MR. COFFEE ® Coffeemaker. Your new VB Series coffeemaker
will wake up with you in the morning and provide you
breaks and treats during your hectic daily activities. How you
enjoy your MR. COFFEE ®
Please read ALL of the instructions in this manual carefully
before you begin to use this appliance. Proper care and
maintenance will ensure a long life and a trouble-free
operation for this appliance. Please save these instructions
and refer to them for cleaning and care tips.
WARNING! To reduce the risk of fire or electric shock, do not
remove any service covers. There are no user
serviceable parts inside the coffeemaker.
Only authorized personnel should repair the
coffeemaker.
4
9/27/11 1:51 PM Page 4
Coffeemaker is up to you!

SPECIAL CORD SET INSTRUCTIONS

1. For your convenience the plug is stored inside the cord
storage.
2. A short power supply cord is provided to reduce the
hazards resulting from a person or pet becoming
entangled in, or tripping over, a longer cord.
3. An extension cord may be purchased and used if care is
exercised in its use.
4. If an extension cord is used, the marked electrical rating
of the extension cord must be at least 10 amps and 120
volts. The resulting extended cord must be arranged so
that it will not drape over a countertop or tabletop
where it can be pulled on by children or tripped over
accidentally.
5. This appliance has a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this
plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician. Do not
modify the plug in any way.
You can customize the length of the power cord so that
it is the exact length you desire. To increase the length
of the power cord: grasp the power cord (not the
power plug) and gently lift it out of the slot, then pull it
away from the coffeemaker. To decrease the length of
the power cord: Grasp the power cord (not the power
plug), lift it out of the slot and gently feed it into the
coffeemaker. Lock the cord in the slot when finished.
5