To Empty The Spent Mandrel Container; Maintenance And Care; To Oil Jaws And Clean Steel Head Sleeve; To Change Jaws - Gesipa TAUREX 1-4 Axial Instrucciones De Uso

8.4

To empty the spent mandrel container

• The container must be emptied in good time; overfilling will cause malfunctions.
9.

Maintenance and care

• The complete grip mechanism must be maintained regularly.
• Never operate the trigger with no grip mechanism fitted. As this could cause serious dam-
age to the tool.
• Regularly check the compressed air and hydraulic connections as well as the hoses. If
damaged, have replaced by a skilled technician.
• The hoses should not be in operation for longer than 6 years, including the maximum
storage time of 2 years.
9.1

To oil jaws and clean steel head sleeve

• Disconnect the blind rivet setting tool from the compressed air supply.
• Unscrew steel head sleeve (B).
• Dip the complete gripping mechanism into an oil bath as far as the O-ring (C) or wet the
jaws (E) with oil and allow to drip off
• Clean steel head sleeve (B)
• Reassemble in reverse order.
9.2

To change jaws

• Disconnect the blind rivet setting tool from the compressed air supply.
• Unscrew steel head sleeve (B).
• Unscrew jaw housing (D).
• Remove jaws (E).
• Clean jaw housing (D) and grease sliding surfaces.
• Fit new jaws (E) from the front (they are held by the grease).
• Reassemble in reverse order, ensuring that all parts are fixed tight.
GB
19