Erreka VULCAN S Manual Del Instalador página 55

Loosen the discharge screw
Mount the gland and introduce the cable
CAUTION. VERY IMPORTANT:
1 Once the operator is mounted on the supports,
turn the discharge screw (1) once to allow the
correct operation of the hydraulic system.
O
If you have to dismount the operator from
its supports, first tighten the discharge screw
in order to prevent the hydraulic fluid from
leaking.
1 Introduce the cable (3) through the gland PG11 (1).
2 Position the gland in the end cap (4) and attach
using the nut PG11 (2).
3 Crimp the Faston connectors in the electrical cables
(5).
INSTALLATION
VULCAN S hydraulic operator
51