AERMEC GLLI10N Manual De Uso página 27

GLLI_N/VMF-E4 CONNECTION
Connect the VMF-E4 to the GLLI_N ther-
mostat; this connection must be made
using a 4-pole shielded cable (maximum
Characteristics of the cable to be used
for the connection:
• EIB Bus cable,
4 poles + shield;
• Mutual max capacity 100nF/km
(800Hz);
• Resistance max 130 ohm/km;
Key:
A = 4-pole shielded cable (not supplied) for con-
nection between VMF-E4 and GLLI_N;
B = Shield folded on the cable for earth con-
nection;
C = Clamp made of plastic conductive material
(supplied) to be fi xed on the metallic structure
of the fan coil;
D = Poles to be connected to the interface con-
trol board (supplied) with the GLLI_N card
length 30 meters); connect the terminals
on the back of the VMF-E4 to the supplied
control board, and complete the connec-
1
2
1 2 3 4 5 6
1 2 3 4 5 6
tion by inserting the connector plug in the
dedicated terminal on the GLLI_N card (as
shown).
3 4
AGLLI10/20NFJ 07/11_4528572_00 27