AERMEC GLLI10N Manual De Uso página 32

AMBIENT PROBE READING CORRECTION
For installations of cassette fan coils that
use the ambient probe positioned in the
LED box, the correction of the probe
reading may be deemed necessary to
improve the thermostat adjustment.
As for the other operations the correc-
Parameters cold and hot can be dif-
ferent from one another and can take
integer values between 0 and 6 [°C].
To set the  hot value for example, the
fan coil should be set to "winter" mode,
and in standby: after pressing the AUX
Key
LED off
Red LED
Blue LED
Green LED
32
AGLLI10/20NFJ 07/11_4528572_00
tion of the probe can only be performed
if the fan coil is in standby, the only
difference is the selection of the correc-
tion that is linked to the season of the
thermostat.
SEASON TYPE OF PROBE CORRECTION
Ambient probe temperature -  cold
Ambient probe temperature +  hot
key (see coding) the receiver goes into
the "probe reading correction" mode dis-
playing the amount of correction:
LED status
coldhot
Correction
[C°]
0
1
2
3
4
5
6