Presser Feet - Singer C240 Manual De Instrucciones

Presser Feet

Important: Make sure that the Integrated Even Feed System is disengaged when using presser foot 2A, 5B.
General Purpose Foot 0A with Integrated Even Feed System (shown as
the display, attached on the machine upon delivery)
This foot is used mainly for straight stitching and zigzag stitching with a stitch
length longer than 1.0 mm.
All Purpose Foot 1A with Integrated Even Feed System (shown as
display)
This foot is used for decorative stitches. The groove on the underside of the foot is
Satin Stitch Foot 2A (shown as
When sewing decorative stitches or short zigzag stitches and other stitches with
less than 1.0 mm stitch length, use this foot. The groove on the underside of the
Blind Hem Foot 3 with Integrated Even Feed System (shown as
display)
This foot is used for blindhem stitches. The toe on the foot guides the fabric. The
red guide on the foot is designed to ride along the fold of the hem edge.
Zipper Foot 4 with Integrated Even Feed System
This foot can be snapped on either the right or the left of the needle, making it easy
to sew close to both sides of the zipper teeth. Move the needle position to the right
or left to sew closer to zipper teeth.
One-step Buttonhole Foot 5B (shown as
This foot has a space in the back to set the size of the buttonhole. The machine will
in the display)
in the display)
in
in the
in the
7