Delivery Specification; Safety Devices - Mafell KSS 400 Manual De Instrucciones Original Y Lista De Piezas De Recambio

Saw blade speed
Cutting speed at normal load
Cutting length
Dimensions including guide track (W x L x H)
Weight cross-cutting system with guide track, without mainsline
Weight portable circular saw without parallel guide fence
Hose connector diameter
Battery-Powered Motor
Power input (normal load)
Current - nominal load
1.4 Noise emission
Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Operation
The noise measurement was recorded using the saw blade included in the standard equipment.
The stated values do not take any series variance into account and are not suitable for determining the immis-
sion sound power level, since this varies depending on the operating time, the machining operation concerned
and environmental factors. The immission sound power level can consequently be determined only in the indi-
vidual instance on the premises of the machine user.
1.5 Vibration
The typical hand-arm vibration is less than 2.5 m/s
1.6

Delivery specification

Cross-cutting system KSS 400 / 24 Vcomplete with:
∅
1 TCT saw blade 160 mm (6 1/4 in.), 32 teeth
1 riving knife / splitter (thickness 1.2 mm / 3/64 in.)
1 parallel guide fence
1 hose connector
1 service tool in holding device on the machine
1 transport case, cpl.
1 operating manual
1 folder „Safety instructions"
1 APS Akku - Power - Station
1 interchangeable battery 24 V, 2.4 Ah
1 "APS Akku - Power - Station" operating manual
1.7

Safety devices

Great attention was paid to the safeguarding of opti-
mum working conditions right from the early devel-
opment stage of this new machine. A wide variety of
mechanical and electrical safety devices, ergonomic
principles and measures to reduce noise and dust
emissions were employed. In accordance with the
no load
normal load
with thickness of stock 12 mm (1/2 in.)
with thickness of stock 49.5 mm (1 15/16 in) 400 mm
260 x 750 x 260 mm (10 1/4 x 29 1/2 x 10 1/4 in.)
Sound power level
104 dB (A)
.
2
European Standards and with regard to the required
protection devices stipulated by the use according to
intended purpose, the machine is protected against
dangers which could not be eliminated by its design.
The protection devices are in particular:
-17-
3750 rpm
3000 rpm
25,1 m/s (76.6 ft/sec.)
470 mm
(18 1/2 in.)
(15 3/4 in.)
6.1 kg (13.73 lbs)
4.8 kg (10.8 lbs)
35 mm (1 3/8 in.)
Emission sound pressure level
96 dB (A)
24 V
340 W
15.5 A