Trim Tab Adjustment - TOHATSU MFS 40A Manual Del Propietário

60
ADJUSTMENT
Side mount type
2
1
1. Throttle friction adjustment screw
2. Decrease
3. Increase
Top mount type
2
3
1. Throttle friction adjustment screw
2. Lighter
9
3. Heavier
ENOM00076-0

4. Trim tab adjustment

ENOW00076-1
Be sure that outboard motor is secured to
transom or service stand, or accidental
drop or fall of outboard motor could lead
to severe personal injury.
Be sure to lock outboard motor when it is
tilted up, otherwise accidental fall of out-
board motor could lead to severe per-
sonal injury.
Do not go under outboard motor tilted up
and locked, or accidental fall of outboard
3
ENOF00078-2
1
ENOF00942-0
WARNING
motor could lead to severe personal
injury.
ENOW00075-1
WARNING
Inappropriate adjustment of trim tab could
cause steering difficulty. After installing or
readjusting trim tab, check if steering load is
even.
If straight-line cruising can not be
achieved, adjust the trim tab located
under the anti-ventilation plate.
If the boat veers toward the left direct
the trim tab towards A (left from rear
of boat).
If the boat veers toward the right
direct the trim tab towards B (right
from rear of boat).
1
1. Trim tab
ENON00022-A
Notes
After adjustment securely tighten the
trim tab fixing bolt.
Check for looseness of the bolt and
the trim tab at regular intervals.
1
ENOF00912-A