TOHATSU MFS 40A Manual Del Propietário página 77

Ocultar thumbs Ver también para MFS 40A:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Remove the spark plugs by turning it
counter-clockwise, using a 5/8" (16
mm) socket wrench and handle that
is provided in tool bag.
5. Inspect the spark plug. Replace the
spark plug if the electrodes are worn
or if the insulators are cracked or
chipped.
6. Measure the spark plug electrode
gap with a wire type feeler gauge.
T h e g ap sh ould b e 0.7 - 0. 8 mm
(0.028-0.031 in). If the gap is differ-
ent, replace the spark plug with a
new one
Use spark plug ; NGK IKR6G8
1
2
1. Electrode
2. Spark gap (0.7–0.8 mm, 0.028–0.031 in)
7. Install the spark plug by hand and
turn it carefully to avoid cross-
threading.
8. Tighten the spark plug to the speci-
fied torque.
ENON00028-0
Note
Spark plug torque:
18.0 N·m (13.3 ft·lb) [1.84 kgf·m]
If a torque-wrench is not available when
you are fitting a spark plug, a good esti-
mate of the correct torque is 1/4 to 1/2 a
turn past finger-tight. Have the spark plug
adjusted to the correct torque as soon as
possible with a torque-wrench.
ENOF00085-0
INSPECTION AND MAINTENANCE
75
10

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Mfs 50a003-11106-7ah1

Tabla de contenido