John Bean EHP System IV-E Manual Del Operador página 14

A. Connect the machine to the air supply (max.
pressure of 12 bar - 170 psi) with a rubber hose able
to withstand such pressure and having an internal
diameter of 1/4" (8 mm) (Fig. 2.0-3).
WARNING!
bEFORE CONNECTING THE MACHINE TO THE AIR
SUPPlY bE SURE All PERSONNEl ARE ClEAR
OF THE MACHINE AND THAT NOTHING IS lEFT
ON THE TURNTABLE AREA (TOOLS)
b. It is recommended that an air valve shut-off be
installed between the shop air supply and the tire
2.0-3
changer in case of air line or filter failure.
C. Should an air lubricator be installed, ensure the
functional ability of the unit.
Ensure the functional ability of the air lubricator by
ensuring that the glass site bowl is filled with air
lubricant. Follow instructions of Chapter 7.0 (I.).
D. Should you install any optional accessories, please
refer to the relevant instructions.
2.3.1 PNEUMATIC HOSE CONNECTION
CHECK
When first setting the machine into operation, check
hose connections and fittings for leakage.
14-EN