Magnetic Charger With Shield; Test Impeller With Shield; Magnetic Clamp And Centering Aligner - Sartorius stedim Flexel Palletank 50L Manual De Usuario

4.5. Pictures & Descriptions of Available Accessories Box Components
The following components are delivered in the Accessories Box together with the LevMixer
drive unit.

4.5.1. Magnetic charger with shield

Figure 9.A. From left to right, Magnetic Charger (LT-DBCI005), Shield for Magnetic Charger,
(LT-DBAK011) and Magnetic Charger (LT-DBCI005) coupled with Shield. During the charging
procedure, the ball bearing (red in far left picture) should rest on the surface of the levitation
head of the drive unit.
4.5.2. Test impeller with shield (LT-DBAK007)
Figure 10. Test impeller levitates above the head of the LevMixer
a levitation test.
Magnetic Charger & Test Impeller correspondence Chart:
Magnetic Charger Corresponding
Test Impeller
LT-DBCI005 LT-DBAK007
LT-DBCI001 LT-DBAK004
*Note: the appropriate magnetic charger must be used to set the LevMixer
with the corresponding impeller. The machine will not properly drive an impeller which does
not have the corresponding magnet configuration.

4.5.3. Magnetic clamp and Centering aligner

Figure 9.B. From left to right, Magnetic
Charger (LT-DBCI001), Shield for Magnetic
Charger, (LT-DBAK011) and Magnetic Charger
(LT-DBCI001) coupled with Shield. During the
charging procedure, the ball bearing (red in
far left picture) should rest on the surface of
the levitation head of the drive unit.
® drive unit during
Magnet Configuration
4-magnet charger & impeller
6-magnet charger & impeller
Figure 11. Magnetic clamp (left) and centering
aligner (right).
The centering aligner is both delivered in
the accessories box and assembled in the
® ®
Palletank for LevMixer
®
Flexel ® Bags
®
for LevMixer
200–1000L
50–100L
® drive unit for use
.
9