Storage; Checks To Be Performed Before And After An Extended Period Of Inactivity; Disposing Of The Product - Carel huniDisk Serie Manual Del Usuario

7. STORAGE

• Keep the appliance in an environment with a temperature range between -10°C and +60°C.
• When the appliance is still packaged, keep it upright.
• Do not stack any other heavy objects on the box.
7.1 Checks to be performed before and after an extended period
of inactivity
7.1.1 Before
• Disconnect the electrical connections and close the supply water taps;
• Cover the appliance to protect it against dust.
7.1.2 After
• Check the condition of the air fi lter and clean if necessary.
• Check that the fl oat switch is operational by moving it, and check that the fan/disk unit turns freely.
• Make sure that all the connections have been completed correctly, according to the instructions.
• For humiDisk65, run a test washing/reset cycle, as described in par. 6.4 in the manual.

7.2 Disposing of the product

The appliance is mainly made from plastic parts, and some metal parts; both materials can be recycled.
Before disposing of the product, separate the plastic parts (cap, fan, fi ns, etc.) from the metal parts (motor,
installation fl anges). Remove the electronic board from the electrical junction box and make sure it is dispo-
sed of according to the legislation in force.
20 humiDisk - +030222022 - rel. 2.1 - 01.03.2012