Declaration Of Conformity - Mettler Toledo Panda7 Instrucciones De Manejo

Paint Scale Panda7, Panda7/X, Panda7/X2
26
9.2

Declaration of conformity

Declaration of conformity: scale line Panda7
We, Mettler-Toledo (Changzhou) Scale & System Ltd., hereby declare with sole responsibility that the Panda7 scales
to which this declaration applies conform to the following EU directives and standards:
Marking
C US
[year]
1)
M
[code]
1) Applies only to certified scales (approval/test certificate no.: R76/1992-NL1-03.10)
Mettler-Toledo (Changzhou) Sacle & System Ltd.
111 Changxi Rd. Changzhou, Jiangsu 213001, PRC
September 2005
Important note for certified scales in EU countries
Factory-certified scales bear on the packing label the mark shown at left, and a green "M" adhesive label
M
on the certification plate. Such scales may be put into operation immediately.
Scales which are certified in two steps and have no green "M" on the certification plate bear on the packing
M
label the mark shown at left. The second step of certification must be performed by an officially recognized
Mettler-Toledo Service Center or a weights and measures official. Please contact Mettler-Toledo Customer
Service. The first step of verification was performed at the factory of manufacture. It included all tests
according to EN45501-8.2.2.
If the period of validity of the certification is limited by national regulations in the individual member states, the operator
of such a scale himself/herself is responsible for its timely recertification.
EU directive
73/23EEC low voltage
89/336EEC EMC
1)
90/384EEC Non-automatic
Scales
Tested to standard
EN61010-1: 2001
UL Std. No. 3101-1
CAN/CSA-22.2 No. 1010.1-92
EN61326-1 Emission Cl. B
EN61326-1 Immunity
AS/NZS2064.1/2, AS/NZS3548
AS/NZS4251.1, AS/NZS4252.1
1)
EN45501 Metrological Aspects
David Zheng
President
Chu Jinlan
Quality Assurance Manager