Connecting To The Power Supply - Mettler Toledo Panda7 Instrucciones De Manejo

Paint Scale Panda7, Panda7/X, Panda7/X2
8
2.3

Connecting to the power supply

Panda7/X and Panda7/X2 for hazardous zones: To connect Panda7/X scales to the power supply you must always
use the PANDA-EX1P certified power supply unit, and for Panda7/X2 scales you must always use the PS-EX2P
certified AC adapter. You must therefore be sure to strictly observe and follow the instructions in the separate
Installation Instructions for the PANDA-EX1P power supply unit and PS-EX2P AC adapter.
(2)
(1)
Important! For safety, Panda7 scales may only ever be
connected to a limited-energy low-voltage circuit.
You must always use the AC adapter supplied with the
scale to connect the scale to the power supply.
Important! Before connecting the AC adapter, check that
the voltage printed on the adapter is the same as the local
power supply voltage.
Note: First connect the AC adapter to the socket of the
scale (1). Only insert the plug of the AC adapter into the
power supply outlet after you have done this (2).
When the scale has been connected, it performs a display
test in which all the segments and then the software
version are briefly displayed. As soon as the zero display
appears, the scale is ready for operation.