Preparing The Scale For Use; Assembling The Scale - Mettler Toledo Panda7 Instrucciones De Manejo

2

Preparing the scale for use

2.1

Assembling the scale

2.2 Setting up and leveling
For accurate weighing results, care must be taken to select the optimal location for the scale!
Place the scale on a stable surface which
is free of vibrations and as horizontal as
possible.
Avoid excessively fluctuating tempera-
tures and direct sunlight. Ensure correct
environmental conditions.
Certified scales only: Adjust the leveling feet until the scale is absolutely horizontal. The air
bubble must lie within the inner circle.
Note: Certified scales must be adjusted at the workplace by an authorized METTLER TOLEDO
service representative.
Major changes of geographical location
It is advisable to calibrate the scale before using it for the first time (see Section 6.3). Certified scales must be certified
on site according to the local national certification regulations.
Paint Scale Panda7, Panda7/X, Panda7/X2
Remove the display module and the scale base from the
packing.
Fix the display module to the scale base using the
included M6x20 screw (see illustration).
Never use a hammer to close paint cans
on the weighing pan.
Avoid drafts (for example, from fans or
air conditioning).
7