Set Power; Temperature Set; User Menu; Enable Fan - Dal Zotto MARTA IDRO 2.0 Manual Del Usuario

SET POWER

The following menu allows you to set the generator power Minimum power 1, maximum power 5.
CONTROLS PROCEDURE
Press key 6.
�
Con rm using key 6 - SET POWER.
�
� Use keys 4 or 5 to set the power.
Press key 1 several times to con rm and exit the menu.
�

TEMPERATURE SET

The following menu allows you to set:
� The room temperature from OFF - 06 ...40°C (for intended models). The room temperature will be displayed alternately with the water
temperature on the display.
� The boiler temperature from 65 - 80°C.
CONTROLS PROCEDURE
� Press key 6.
Proceed by pressing key 2 until TEMPERATURE SET is displayed.
�
Con rm using key 6.
�
� Use keys 4 or 5 to set the ROOM AIR TEMP SET.
Con rm using key 6.
�
� Use keys 4 or 5 to set the H2O TEMP SET.
Press key 1 several times to con rm and exit the menu.
�

USER MENU

ENABLE FAN

This menu allows (for the models envisioned) to enable or disable the operation of the tangential fan.
CONTROLS PROCEDURE
Press key 6.
�
Proceed by pressing key 2 until USER MENU is displayed.
�
Con rm using key 6.
�
Use keys 4-5 to enable/disable ventilation.
�
Press key 1 several times to con rm and exit the menu.
�

V1 AIR

The menu allows the user to adjust the speed of the front fan in percentage (for envisioned models).
CONTROLS PROCEDURE
Press key 6.
�
Proceed by pressing key 2 until USER MENU is displayed.
�
Con rm using key 6.
�
Press key 2 until ''V1 AIR'' appears.
�
Use keys 4 -5 to increase (4) or decrease (5).
�
Press key 1 several times to con rm and exit the menu.
�
48 ENGLISH
1
1