General Operation - Apex Pro-CARE Bariatric Manual De Uso

English
English
4. OPERATION
NOTE: Always read the operating instruction before use.

4.1 General operation

1. Switch on the main power switch found on the
side of the pump.
2. Once the pump begins delivering air into the
mattress it will take approximately 30-40
minutes to fully inflate the mattress.
3. The low-pressure indicator (yellow LED) will light
up when the mattress is not fully inflated.
4. When the appropriate pressure is reached, the
low-pressure indicator (yellow LED) will go off
and pump will enter the alternating mode.
5. Adjust the pressure setting based upon patient
comfort level.
6. According to the weight and height of the patient,
adjust the pressure setting to the most
comfortable level without bottoming out, then the
pressure in mattress will slowly increase to the
intended value after the air mattress is ready to
use.
NOTE: Every time the mattress is set up for
use, it is recommended that the
pressure first to be set to the max.
The user / career can then adjust
air mattress weight levels to the
desired softness after set up has
been completed.
10