The friction force of the MyolinoWrist 2000 can be adjusted by evenly
tightening or loosening the screws (fig. 14).
Please provide your patient or his guardian / attendant with the Allen
wrench included so they can readjust the friction force according to the
situation.
NOTICE
Risk of damage due to loosened screws. The countersunk head screws
are designed so they should not loosen during use. Nevertheless, when
this happens, the screws must be retightened. Therefore, the friction
force of the wrist unit must be checked on regular basis.
5 Legal information
All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
5.1 Liability
The manufacturer will only assume liability if the product is used in accor-
dance with the descriptions and instructions provided in this document. The
manufacturer will not assume liability for damage caused by disregard of
this document, particularly due to improper use or unauthorised modification
of the product.
5.2 CE conformity
This product meets the requirements of the European Directive 93 / 42 / EEC
for medical devices. This product has been classified as a class I device
according to the classification criteria outlined in Annex IX of the directive.
The declaration of conformity was therefore created by the manufacturer
with sole responsibility according to Annex VII of the directive.
Ottobock | 15