Test Settings Tab - Greenlee Textron GVIS 300 Manual De Instrucciones

Test Settings Tab

Analysis Mode
To change the mode of grading, click the Test Settings tab and choose Automatic or Manual in the Analysis
Mode group. Automatic mode is not available if a GVIS 300 is selected for a video source.
Fiber Type
The two types of fiber the technician may choose are single-mode and multi-mode. So that the correct size
critical zone is used during analysis, the technician must choose the correct fiber type. Single-mode diameter is
25 μm; multi-mode is 65 μm.
Choosing a Video Source
To select a video source, click on the drop-down box in the Video Source group. Greenlee probe names are
Greenlee HDP Probe, USB 2.0 Camera, and Videology Camera.
Greenlee / A Textron Company
GVIS 300 • GVIS 400 • GPAD 250
Figure 14. GVIS Test Settings Tab
21
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070