Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Greenlee GVIS Software Instructions
Introduction
When connected to Greenlee's GVIS 400-HDP or GVIS 300 field connector inspection system, the Greenlee
GVIS software allows the user to inspect and save fiber connector end face images and pertinent data. GVIS
also provides automated pass/fail analysis according to the IEC 61300-3-35 specification.
System Requirements
Operating System Compatibility
• Windows Vista
• Windows 7
• Windows 8
Software Requirements
• Microsoft .NET Framework 4 or newer
• Microsoft Visual C++ 2010 x86 Redistributable
Windows Driver Requirements
Imager Support
• GVIS 400-HDP uses the UVC 1.1 driver included with Windows; no other driver installation is needed
• GVIS 300 uses the Videology driver
Serial Port Support
If Greenlee's GRP 460 power meter is to be used, download the FTDI serial port driver from http://www.ftdichip.
com/Drivers/CDM/CDM20824_Setup.exe.
Manual Installation of GVIS Software
If you downloaded the software from Greenlee's website, extract the files on your PC by running the installer.
After the installer is finished, close it and then navigate to C:\Greenlee Software\GVIS and double click on
setup.exe.
Greenlee / A Textron Company
GVIS 300 • GVIS 400 • GPAD 250
9
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Publicidad
Capítulos
Tabla de contenido
