Gpad 250 Portable Access Device; Typical Connection - Greenlee Textron GVIS 300 Manual De Instrucciones

Operation

GPAD 250 Portable Access Device

USB Port – Insert the USB probe connector into this port.
1.
LED – Illuminates to indicate that the GPAD 250 is actively
2.
producing a Wi-Fi hotspot.
Power Switch – Used to turn the GPAD 250 on and off so
3.
that a Wi-Fi hotspot is activated.
4. Power Connection – To charge the battery, insert the
AC charger into this connector. Total run time using the
battery is approximately 4 hours. The battery can be re-
charged while the hotspot is active, but the re-charge will
take longer.
5. Fan – Regulates the internal temperature of the GPAD
250. To prevent overheating, make sure that the fan
output is not blocked.

Typical Connection

Greenlee / A Textron Company
GVIS 300 • GVIS 400 • GPAD 250
Wi-Fi
5
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
1 2
3
4
5