Thorough Cleaning; Maintenance - Silvercrest SRD 600 A1 Manual Del Usuario

 Press the Unlock button [2] to open the Blade system. WARNING! You cannot remove the Blade
system [1].
 Clean the inside of the Blade system [1] and the trap using the enclosed cleaning brush.
 Close the Blade system [1] until you hear it latch.
 Replace the protective cap on the Blade system [1].
Cleaning the Trimmer
 Open the Trimmer [8] by pressing on the bar of the Trimmer [8] and pushing it up.
 Clean the Trimmer [8] using the supplied cleaning brush.
 Add a drop of sewing machine oil to the Trimmer [8] every 6 months or so.
 Close the Trimmer [8] by pressing on the bar of the Trimmer [8] and pushing it down.

8.1.2. Thorough cleaning

If the Clean [7] symbol appears, a thorough cleaning is necessary. Proceed as follows:
 Remove the protective cap.
 Press the Unlock button [2] to open the Blade system. WARNING! You cannot remove the Blade
system [1].
 Clean the inside of the Blade system [1] and the trap under running water.
 Wait until the Blade system [1] and the trap are dry.
 Close the Blade system [1] until you hear it latch.
 Replace the protective cap on the Blade system [1].

8.2. Maintenance

If the Replace blade heads [6] symbol appears, you must replace the blade heads.
The blade heads are wearing material and are not covered by the warranty.
SilverCrest SRD 600 A1
- 13